• 1 Channels 60 MS/s per channel
• 12-Bit A/D resolution, PC/104 Card.
• 1 Mega Samples per channel (8M optional).
• Trigger on external TTL input, or software
• Standard +/-0.5V input range. Custom +/- 0.25 to +/-2.0V Range (opt 3). 
• Software Programmable Clock Rate of 60MHz, 30MHz, 15MHz, 7.5MHz
• Programmable Memory Size from 128 samples to 8M samples in powers of 2
• Software Drivers for Windows 98 NT/2000/XP, and Linux drivers (option 4)

The AD160-12-1M-104 features one 12-bit, high speed singled ended analog input channel on a standard PC/104 module.
The analog input is connected through an SMA connector and terminated into 50 ohms. Input bandwidth is limited to 20 MHz by default for the user’s convenience, although input bandwidth can be set as high as 100 MHz (see option 2).
 
TRIGGERING
 
The board is designed to be edge triggered by TTL input or by software. The user can also set the polarity of an external input trigger.
 
TIMING and A/D CONVERSION
 
Timing is managed by a on-board controller referenced to a crystal oscillator. The clock frequencies available are divided down in powers of 2 from the master clock to provide 60MHz, 30MHz, 15MHz, and 7.5MHz software programmable Sampling Rates.
 
MEMORY
 
The AD160-12 comes with 1MegaSamples of memory per channel with an option to go up to 8 Mega samples.
 
SOFTWARE

A universal DLL is available for Windows 98/NT/2000/XP and Linux. Call Acquitek for drivers for other operating systems. A simple debug Graphical User Interface (GUI) software for windows is included with the drivers for quick driver install verification and simple testing.